DO YOU NEED A POWER FLUSH?
• Is your central heating system slow to warm up?
• Are some of your radiators partially or completely cold?
• Is the water in your radiators dirty?
• Do your radiators leak?
• Does your boiler make noises?
• Does your central heating system have repeated pump failures?

Any of these symptoms could indicate that your central heating system has circulation and flow problems, resulting from internal corrosion and the subsequent formation of iron oxide (rust), sludge and scale deposits.
A POWER FLUSH can restore circulation and efficiency to your central heating system by removing these undesirable products. It purges them from the system, replacing aggressive water with clean water, chemically treated with systemsafe corrosion inhibitors to help prevent similar future problems.

WHAT IS POWER FLUSHING?
Power Flushing is the most efficient and effective method of cleansing a central heating system. The principle is to create a powerful fresh water flow under controlled conditions to remove debris from the heating system.
By connecting the power flushing unit to the heating circuit in place of the system pump, boiler or radiator the circuit can be thoroughly cleansed of limescale and corrosion debris.
When used in conjunction with a Power Flush acid cleaner a typical Power Flush can be completed within three to four hours.

THE CLEANING AND TREATING OF CENTRAL HEATING SYSTEMS
All new systems should be pre-commission cleansed in accordance with BS:7593 and Benchmark.
This ensures flux residues, excess jointing compounds, mineral oil and other contaminants that can be found in the system following installation, and that can effect the performance of the system or cause component failure, are removed.
It is important when installing new boilers into old systems that all the sludge is first removed from the system or this could accumulate in the new boiler and lead to premature failure.

FOR MORE INFORMATION PLEASE CONTACT ME